Avoiding water damage in the attic

Check the natural drying of your property must start in the attic, because it is located at the top of the house, separating the roof from the rest of the house. Read the following guidelines to prevent water damage to the ceiling and floor, artifacts common attic insulation, vents and saved lamps. Perform thorough inspections every few months to ensure that your attic is maintained in good condition.

The ceiling and floor.

Be sure to look up and down when working in your attic. Pay special attention to the openings in the roof and pipes, vents and chimney. Look that all surfaces are dry and no mold or putrefaction. In addition, collate beams and ceiling covered. It is recommended to do this review during the morning to make sure that the roof is sealed and there is no daylight penetrating through the cracks in the ceiling. Inspect the floor and make sure it is dry.

Saved lamps.

The presence of rust and corrosion indicates possible invasion of moisture and electrical hazard potential. Other signs of water damage are stains above or near the timber, or the insulator. Consider replacing the old bulb with other newer and safer to include an insulator.


The attic ventilation is important. Typically, vents are installed along the roof edge. The moisture or discoloration of the surface near the vents is a sign; locate the source of moisture and center the problem. When inspecting the roof, remove any bird ‘s nest and debris that is blocking the vents.

The insulation.

When damaged by moisture and water, the insulation becomes thin and flat. Check the insulation frequently, especially after the rainy season. Touch it. If you feel wet, find the source of moisture and solve the problem immediately. Remember: Wet isolator is useless, but will continue to serve for a time and create high humidity conditions. If the insulation is wet, replace it.

Common to the attic artifacts.

Periodically inspect the air conditioning, swamp coolers and HVAC systems. Look for damage and loose connections. Inspect around and under these devices. Remember that damaged artifacts can damage everything they have underneath.